Name
Quantity
W1
1
S3
4
P1
N1
S3 - M8x50
P1 - Pad M8
N1 - Nut M8
3. W1 element put between the sides and check if the holes
are on a correct place. Secure by S3 screws and N1 nuts
using P1 pads.
420
453
130
L-260
L
103
Страница 1: ...MANUAL INSTRUCTION...
Страница 2: ...lvanised with zink magnesium layer RAL 7047 and RAL 9005 powder coated Unit sides are made of tempered glass Coil copper pipe with aluminium fins water side heat exchanger Air went valve TRV thermosta...
Страница 3: ...1 1 S3 4 P1 4 N1 4 W1 S3 P1 N1 S3 M8x50 P1 Pad M8 N1 Nut M8 3 W1 element put between the sides and check if the holes are on a correct place Secure by S3 screws and N1 nuts using P1 pads 420 453 453 1...
Страница 4: ...using S4 screws Repeat for other boards 6 Put the bench in the final destination secure to the floor using K1 dowels and S5 screws 7 Perform a hydraulic connection to the pipe connections 8 Put the C5...
