Editing Scenes and Programs
To insert a scene into a stored program, enter programming mode, select the program you wish to insert the new scene
into, then using the select button (K), move the indicator (E) to the scene display (A). Use the up (I) and down (J) buttons
to select the program step (1-50) into which you wish to insert the new scene. Press the projector button (H) and follow
the procedure for programming projectors as described above. When the projectors have been set, press the insert button
twice to add the scene to the program.
You may also insert a scene by pressing the insert button once, then pressing the select button to move the indicator to
the projector display. Choose and set the projectors as desired for the new scene, and then press the insert button again
to record the scene into the program.
To delete a scene, first enter programming mode, then using the select button (K), move the indicator (E) to the scene
display (A). Use the up (I) and down (J) buttons to select the scene to delete, then press the delete button twice. All the
scenes are moved to fill the empty scene.
To delete a program, in programming mode select the program to delete using the up (I) and down (J) buttons, then press
delete (F). The scene display (A) and the program display (B) will flash. Press the program button (G) and “AL” will show
in the scene display (A). Press delete (F) again and the program will be permanently deleted.
Running a Program
To run a program, press the program button (G) and use the up (I) and down (J) buttons to select the program you wish to
run. Use the stand (M) and cross (N) sliders to alter the speed of the program and also length of hold (fade time) of each
scene. Note: To run programs in sound-active mode, move the stand (M) slider to 100% (top position).