Ventus W820, Руководство пользователя

Страница: 6 / 24

- You are now able to choose the channel of the outdoor sensor. It is present to channel 1.
- Slide the on/off switch to on.
- Close the battery door again and fasten the screws. You now have 1 minute to connect
with the indoor unit.
4. Connect the outdoor sensor with the Indoor unit:
- Press and hold“ ”until you see the LCD flashing.
- Once connection has been established the LCD should stop flashing and the values of the
outdoor sensor will appear on the LCD. Device will automatically establish the “CH”
choice made on the outdoor sensor.
Troubleshoot:
• If no values appear after the LCD has stopped flashing the outdoor sensor is not found by
the main unit.
• Try to remove and insert the batteries again. Remember to slide the on/off switch to on.
5. Switching between indoor and outdoor values:
• Single touch on the“ ”will scroll between channels and the indoor values.
• Remember you can connect up to 3 outdoor sensors to one main unit.
• Set it to “ ”and the Main unit will scroll between each outdoor sensor connected from
channel 1 to channel 3 in loop.
EN