3
You may also set the weather forecast by holding [CLOCK] button to enter the setting mode. Press [CLOCK]
repeatedly to skip the clock & calendar setting until the weather icon flashes. Press [+] or [
-
] to select local
weather condition. Press [CLOCK] to confirm and exit.
12/24hr format > Hr > Min > Yr > D/M or M/D format > Month > Date > Weather Forecast > EXIT
NOTE:
Different geographical location such as inland area or coastal region has different weather forecasting response.
In case your weather forecast does not reflect the actual weather condition over a long period of time, it is
necessary to follow above setting procedure for fine tuning the weather forecast’s accuracy
RADIO-CONTROLLED CLOCK
The unit will start synchronizing the clock few minutes after battery/adapter installation or reset. In normal mode,
press [ /+] until
icon appears to enforce searching of radio-controlled clock signal. If this icon disappears
afterwards, radio time signal is not available at the moment. Try other locations later. Place the unit away from
metal surface & sources of interference such as mobile phones, appliances, TV etc.
Antenna icon with full signal strength
will appear on screen if the reception of radio-controlled time is
successful. The radio-controlled clock will have a daily synchronization at around 02:03 and 03:03 everyday. Each
reception cycle is minimum 2.5 minutes and maximum 10 minutes.
Note: During radio-controlled reception period, the auto-scrolling display function will be disabled temporary and
resume to normal when the reception is completed.
INDOOR / OUTDOOR TEMPERATURE & HUMIDITY
Touch [<] or [>] to select indoor or outdoor display mode and the corresponding “INDOOR” or “OUTDOOR” icon
will appear above the temperature readings. The humidity reading is highlighted in green on the right of the
display.
If more than one channel (remote sensor) are registered, touch [<] or [>] repeatedly to select the different
channels in the “OUTDOOR” display mode.
Press [C/F] button to select temperature unit degree C/ F.
INDOOR / OUTDOOR HEAT INDEX & DEW POINT
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot the heat-humidity
combination makes it feels.
Dew point is the saturation point of the air, or the temperature to which the air has to be cooled in order to get
condensation.
In the “INDOOR” or “OUTDOOR” display mode, touch [MODE] key to toggle between the temperature/humidity,
heat index & dew point of the corresponding indoor or outdoor readings.
