10.1 Reception of outdoor transmitter
If main unit failed to receive transmission from outdoor rain sensor after the batteries inserted
(“--.--”display on the LCD), hold “ ” button (B3) on the main unit to receive transmissions
manually.
10.2 Rainfall
(1) Today Rainfall
Today rainfall:
•
Today’s accumulated total rainfall. Press “RAIN HISTROY” button (B1) to view past 30 days
daily total rainfall. The display will return to today’s rainfall if there’s no button been pressed in
15 seconds.
Icon “ ” flashes when there’s rainfall.
If the rainfall is over 4.9mm in 10 minutes, icon“ ”flashes.
(2) Total Rainfall
• Total Rainfall: Accumulated rainfall from start-up or reset.
Press “RAIN SINCE” button (B5) to view the since time of total rainfall, “SINCE” icon display.
Hold “RAIN SINCE” button to clear rainfall record.
(3) Rain Alert
•
Press “RAIN ALERT” button (B7) to activate or deactivate rain alert function. When function is
activated, the alert icon “ ” display.
•
Hold “RAIN ALERT” button (B7) to enter the alert value setting. Press “▲” or “▼“button to
adjust the setting and press “RAIN ALERT button to confirm the setting.
•
When alarm alerts, icon flashes, press any buttons to stop alerting, otherwise it would
sounds for 2 minutes and stop automatically.
11. Backlight
•
Press “LIGHT” button (B4), back light states for around 5 seconds.
12. Low battery indication:
•
The low battery icon “ ” will appear indicating that outdoor sensor is in low battery
status. The batteries should be replaced.
12. Precautions
• Use a pin to press the reset button if the Unit does not work properly.
• Avoid placing the clock near interference sources/metal frames such as computer or TV sets.
• The clock loses its time information when the battery is removed.
• Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
• The outdoor sensor must not be set up and installed under water. Set it up in away direct
sunlight and Rain
• Never clean the device using abrasive or corrosive materials or products. Abrasive cleaning
agents may scratch plastic parts and corrode electronic circuits
• If there is any inconsistency of weather forecast between Local Weather Station and this unit,
the Local Weather Station’s forecast should prevail. The manufacturer will not take responsible
for incorrect forecasting from this unit
GB