Venturo HT45KX-25 Скачать руководство пользователя

Страница: 9 / 60

SECTION

DATE

SUPERSEDES

TITLE

ET/HT CRANES

C150

02-21-14M

12-20-13L

HAZARD APPS & INFO

15394

VENCO VENTURO INDUSTRIES LLC

CINCINNATI, OHIO

SIGN NO. 15393 DISPLAYS THE INTERNATIONAL SYMBOL

FOR ELECTRICITY AND WARNS OF DANGER FROM AN
ELECTRICALLY CHARGED VEHICLE, CRANE, OR LOAD.
FOUR ARE RECOMMENDED (ONE FOR EACH SIDE AND

ONE FOR EACH END OF VEHICLE) TO BE APPLIED IN
LOCATIONS WHICH ARE READILY VISIBLE TO GROUND
PERSONNEL.

SIGN NO. 15401 PROVIDES ADDITIONAL

WARNING OF LEGAL REQUIREMENTS WHEN

OPERATING NEAR HIGH VOLTAGE LINES. THIS
SIGN IS PLACED ON THE CONTROL PENDANT
SIDE OF BOOM.

Table A - Minimum Clearance Distances

Voltage

Minimum clearance distance

(nominal, kV, alternating current)

(feet) *

Up to 50...............................................................................................

over 50 - 200.......................................................................................

over 200 - 350.....................................................................................

over 350 - 500.....................................................................................

over 500 - 750.....................................................................................

over 750 - 1000...................................................................................

Table T - Minimum Clearance Distances While Traveling With No Load

Voltage

While traveling - minimum clearance distance

(nominal, kV, alternating current)

(feet) *

0 - 0.75...........................................................................................

over 0.75 - 50..................................................................................

over 50 - 345...................................................................................

over 345 - 750.................................................................................

over 750 - 1000...............................................................................

Over 1000......................................................................................

(as established by the utility owner/operator or registered

professional engineer who is a qualified person with respect to
electrical power transmission and distribution).

NOTE: ENVIRONMENTAL CONDITIONS SUCH AS FOG, SMOKE, OR PRECIPITATION MAY REQUIRE INCREASED CLEARANCES

Over 1000...........................................................................................

(as established by the utility owner/operator or registered

professional engineer who is a qualified person with
respect to electrical power transmission and distribution).

ELECTROCUTION HAZARD

KEEP CLEAR OF TRUCK AND LOAD

DEATH OR SERIOUS INJURY

CAN RESULT FROM

CONTACT WITH THE LOAD, THE CRANE, OR THE

VEHICLE IF BOOM OR LOAD LINE SHOULD BECOME

ELECTRICALLY CHARGED.

15393-C

DANGER

D A N G E R

UNLAWFUL TO OPERATE THIS EQUIPMENT

WITHIN 20 FEET OF HIGH-VOLTAGE LINES

OF 350,000 VOLTS OR LESS.

FOR MINIMUM CLEARANCES OF HIGH-VOLTAGE LINES IN EXCESS OF 350,000 VOLTS, REFERENCE OSHA 1926.1408,

CRANE'S SAFETY MANUAL, AND CAL-OSHA ARTICLE 37, TITLE 8, HIGH-VOLTAGE ELECTRICAL SAFETY ORDERS

15401-D

VEHICLE & CRANE MOUNTED ELECTRICAL

HAZARD SIGN APPLICATION & INFORMATION

Содержание HT45KX-25





























































Результаты поиска

Содержание HT45KX-25

Отзывы:

Похожие инструкции для HT45KX-25

Бренды по названию

Популярные бренды

Venturo HT45KX-25, Руководство пользователя

Результаты поиска

Содержание HT45KX-25

Отзывы:

Похожие инструкции для HT45KX-25

Бренды по названию

Популярные бренды