Venturo ET8K, Инструкция по установке и эксплуатации

Страница: 31 / 56

22245
C200
2-26-08F
WIRE ROPE INSTALLATION DRAWING
ET8K AND LARGER CRANES
SUPERCEDES
TITLE
DATE SECTION
CINCINNATI, OHIO
MANUFACTURING, INC.
STEP 1: UNWIND COIL OF WIRE ROPE BY
'ROLLING' ALONG THE FLOOR. THIS
WILL PREVENT 'KINKING'.
STEP 2: INSERT WIRE ROPE END THROUGH
ANTI-TWO-BLOCK WEIGHT.
STEP 3: INSERT WIRE ROPE END INTO POCKET
OPENING ON WINCH AND THROUGH
WEDGE POCKET AS SHOWN IN (FIG 1).
CAUTION: IF THE WIRE ROPE IS NOT INSTALLED
FOR THE CORRECT DRUM ROTATION,
THE WINCH BRAKE VALVE WILL NOT
HOLD THE LOAD.
CAUTION: THERE MUST ALWAY BE AT LEAST
(3) TURNS OF WIRE ROPE ON THE
WINCH DRUM WHILE UNDER LOAD.
NOTE: SOME WINCHES WILL BE SUPPLIED
WITH A HEX NUT IN LIEU OF A WEDGE
FOR INSTALLING THE WIRE ROPE.
WIRE ROPE INSTALLATION
8-18-09G
FIG 1