Printed in China
811-338991W010
CUSTOMIZING THE FUNCTION SETTINGS
E - 1
E - 6
E - 7
SYMPTOM CAUSE (AND REMEDY)
•
Ensure the AC adapter is connected.
•
The unit is not turned on.
•
Make sure that you select ON mode.
•
The system is in pause mode. Press the
PLAY
button to return to
normal play mode.
•
The unit is in fast-forward or fast-reverse mode. Press the
PLAY
button to return to normal play mode.
•
Make sure the AUDIO/VIDEO output connections are correct.
•
The DTS DVD disc cannot be decoded to have speaker output.
•
The unit is too hot; shut off the unit for 30 minutes to cool it down.
•
The region number of the disc doesn't match the region number of
this unit.
•
Clean the disc.
•
The disc is scratched.
•
Please adjust the LCD's brightness and contrast using the
SETUP
button on the panel.
•
The plugs and jacks are dirty. Wipe them with a cloth slightly
moistened with alcohol.
•
Clean the disc.
•
There is no disc inside. (“No Disc” appears on the screen).
•
Insert the disc correctly with the playback side facing down.
•
Clean the disc.
•
The unit and disc region number are incompatible.
•
Condensation may have formed inside the unit due to a sudden
change in temperature. Wait about an hour for it to clear and try
again.
No power.
No sound or only
a very low-level
sound is heard.
No picture.
The picture is not
clear.
Severe hum or
noise is heard.
The disc does not
play.
TROUBLESHOOTING GUIDE
MAINTENANCE
P H O T O
DIGITAL
8” PORTABLE DVD
PLAYER
OWNER’S MANUAL
VIEWING JPG FILES
PVS3389
SAFETY PRECAUTIONS
* SEE BOTTOM OF UNIT FOR GRAPHIC
SYMBOLS *
This product
contains a low
power laser device.
On Placement
•
Do not use the unit in places that are extremely hot, cold, dusty, or humid.
•
Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering
it with a cloth, or by placing it on carpeting.
On Safety
•
When connecting or disconnecting the AC adapter, grip the plug and not the cord itself. Pulling
the cord may damage it and create a hazard.
•
When you are not going to use the unit for a long period of time, disconnect the AC adapter.
On Condensation
•
When left in a heated room where it is warm and damp, water droplets or condensation
may form inside the unit. When there is condensation inside the unit, the unit may not
function normally. Let the unit stand for 1 to 2 hours before turning the power on, or
gradually heat the room and allow the unit to dry before use.
Rating Plate Location
•
The rating plate is located on the bottom of unit.
FCC Statements
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
WARNING:
Should any trouble occur, disconnect the AC adapter and refer servicing
to a qualified technician.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent
copyrighted material without permission.
Apparatus Claims of U.S. Patent Nos. 4,907,093; 5,315,448; and 6,516,132 licensed for limited
viewing uses only.
This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.
WARNING:
TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO
NOT PLACE OBJECTS FILLED WITH
LIQUIDS ON OR NEAR THIS UNIT.
CAUTION:
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION:
DANGER OF EXPLOSION IF
BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR
EQUIVALENT TYPE.
CAUTION
I
NVISIBLE LASER RADIATION
WHEN OPEN.
AVOID EXPOSURE TO BEAM.
The lightning flash with an arrowhead
symbol, within the equilateral triangle, is
intended to alert the user to the presence
of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient
magnitude to cause an electric shock.
The exclamation point within the
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in this owner’s manual.
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
•
Do NOT touch the surface of the unlabeled side of the disc.
•
Do NOT stick paper or tape on the surface.
•
Do NOT expose the disc to direct sunlight or excessive heat.
•
Clean the disc before playback. Wipe the disc from the center outward
with a cleaning cloth.
•
NEVER use solvents such as benzine or alcohol to clean the disc.
•
Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may
cause malfunctions.
Cleaning the Unit
•
Be sure to turn the unit off and disconnect the AC power adapter before maintaining the unit.
•
Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth
that has been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe
with a dry cloth.
•
Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use
compressed air to remove dust.
Important Note
Before transporting the unit, remove the disc from the disc compartment.
This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommended).
Viewing JPG Files
1.
Open the disc door.
2.
Hold a JPG file disc by its edges and gently push it onto the spindle with the label side facing
up until you hear a “click”.
3.
Close the disc door. The JPG files on the disc will be displayed one by one automatically.
4.
Press the
STOP
button to display a folder list. Press the
or
button to highlight a JPG
file to play. Press the
PLAY
button to start playback.
Notes:
•
You can press the
PAUSE
button to freeze the picture. Press the
PLAY
button to resume
picture slide show.
•
You can press the
STOP
button to quit playback.
•
You can press and hold the
PREV
or
NEXT
button to change the picture.
•
You can press the Cursor buttons (
,
, ,
) to rotate direction of the picture by 90
o
.
•
Some discs may not permit this operation.
00:00
00:00
001/035
\
DSCN0281
DSCN0282
DSCN0283
DSCN0284
DSCN0285
DSCN0286
Language Setup
1.
Press the
SETUP
button in stop mode.
2.
Press the
button to select Language Setup Page.
3.
Press the
/
button to select the option (OSD Language, Audio, Subtitle or Disc Menu),
then press the button.
4.
Press the
/
button to select your preferred language, then press
the
PLAY
button
to confirm.
5.
Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6.
Press the
SETUP
button to exit the menu.
Go To Language Setup Page
- - Language Setup Page - -
System
Language
Video
OSD Language
Audio
Subtitle
Disc Menu
Eng
Eng
Off
Eng
Video Setup
1.
Press the
SETUP
button in stop mode.
2.
Press the
/
button to select Video Setup Page.
3.
Press the
/
button to select the option (Brightness or Contrast), then press the button.
4.
Press the
/
button to adjust the setting, then press the
PLAY
button to confirm.
5.
Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6.
Press the
SETUP
button to exit the menu.
Brightness
Contrast
Go To Video Setup Page
- - Video Setup Page - -
Language
00
00
System
Video
Notes:
•
Some DVDs may not play in the audio language selected. A prior language may be
programmed on the disc.
•
Some DVDs may be set to display subtitles in a language other than the one you selected.
A prior subtitle language may be programmed on the disc.
•
Some DVDs allow you to change subtitle selections only via the disc menu. If this is the case,
press the
MENU
button and choose the appropriate subtitle language from the selection on
the disc menu.
•
Some DVDs may not include your pre-selected language. In this case, the DVD player
automatically displays disc menus consistent with the disc's initial language setting.
Tv Display
Default
Wide
No
Go To System Page
- - System Page - -
System
Language
Video
System Setup
1.
Press the
SETUP
button in stop mode.
2.
Press the
/
button to select System Page.
3.
Press the
/
button to select the option (TV Display or Default), then press the button.
4.
Press the
/
button to adjust the settings, then press the
PLAY
button to confirm.
5.
Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6.
Press the
SETUP
button to exit the menu.
Default
It takes 3-5 seconds to reset the DVD settings to the factory default.
TV Display
Pan Scan
•
When wide-screen video is played, this mode clips the right
and left sides of the image so that it can be viewed on a
conventional screen.
•
Some wide-screen DVDs that do not permit Pan Scan mode
playback are automatically played in letterbox mode (black
bands that appear at the top and bottom of the screen).
Letter Box
•
When wide-screen video is played in this mode on a
conventional screen, black bands appear at the top and
bottom of the screen.
Wide Screen
•
This is the correct mode for playing wide-screen videos on
the unit screen or other external wide-screens.
Notes:
•
The displayable picture size is preset on the DVD. Therefore
the playback picture of some DVDs may not conform to the
picture size selected.
•
When you play DVDs recorded in the 4:3 aspect ratio, the
playback picture will always appear in the 4:3 aspect ratio
regardless of the TV display setting.
•
Select Wide Screen to conform the LCD screen on the unit.
Always be sure that your TV display conforms to the actual
TV in use if you connect the unit to a TV.
Wide Screen
Letter Box
Cut off when a wide-screen
video image is played.
Pan Scan
Specifications and external appearance are subject to change without notice.
Serial no. ........................................................... Invoice no. ........................................................
Date purchased ............................................... Dealer name .....................................................
LIMITED WARRANTY
Important:
Also keep your "Bill of Sale" as proof of purchase.
VENTURER ELECTRONICS ("VENTURER")
makes the following limited warranty. This limited
warranty extends to the original consumer purchaser and is limited to non-commercial use of the
product.
Ninety (90) Day Parts & Labor Warranty
VENTURER
products purchased in the United States are warranted to be free from defects in
materials or workmanship for a period of ninety (90) days from the date of their original retail
purchase. If the unit fails to conform to this warranty, we will service the product using new or
refurbished parts and products, at
VENTURER
's sole discretion.
During a period of ninety (90) days from the effective warranty date, Venturer will provide, when
needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain
warranty service in the United States, you must first call our
Customer Support Center at
1-866-444-6478 or 1-800-252-6123, during the hours listed in the box below.
The determination
of service will be made by
VENTURER
Customer Support.
PLEASE DO NOT RETURN YOUR UNIT
TO VENTURER WITHOUT PRIOR AUTHORIZATION.
New or remanufactured replacements for
defective parts or products will be used for repairs by Venturer at its designated Service Center for
ninety (90) days from the effective warranty date. Such replacement parts or products are warranted
for an additional ninety (90) days from the date of repair or replacement. The Customer will be required
to ship the unit to the Service Center indicated at the time Customer Support is contacted to make
the necessary repairs. The customer is responsible for all transportation charges to the service facility.
Packaging and Shipping Instruction
When you send the product to the Venturer service facility you must use the original carton box
and packing material or an equivalent as designated by
VENTURER
.
LIMITED WARRANTY
Your Responsibility
(1) You must retain the original sales receipt to provide proof of purchase.
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or
Canada.
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product
or parts which have been lost or discarded, or damage to product or parts caused by misuse,
accident, improper operation or maintenance, or use in violation of instructions provided with
the product, or to product which has been altered or modified without authorization of
VENTURER
,
or to products or parts thereof which have had the serial number removed or changed.
Out of Warranty
In the event your product requires repair after the limited warranty period has expired,
please contact our Customer Support Center at
1-866-444-6478, 1-800-252-6123
or
www.
venturer
.com
.
Hours: Monday-Thursday: 9-7, Friday: 9-5, Saturday: 9-12 EST.
Important:
You are responsible for any transportation, shipping or insurance relative to the return of
product to our Product Returns Center.
All warranties implied by state law, including the implied warranties of merchantability and fitness
for a particular purpose, are expressly limited to the duration of the limited warranties set forth
above. With the exception of any warranties implied by state law as hereby limited, the foregoing
warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar
obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no
event shall
VENTURER
be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the
terms of these warranties in any manner whatsoever. The time within action must be commenced
to enforce any obligation of
VENTURER
arising under the warranty or under any statute, or law
of the United States or any state thereof, is hereby limited to ninety (90) days from the date of
purchase. This limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary,
from state to state. Some states do not allow limitation on how long an implied warranty lasts, when
an action may be brought, or the exclusion or limitation of incidental or consequential damages,
so the above provisions may not apply to you.
For more information on other products and services, please visit our web site at
www.
venturer
.com
FOR SERVICE AND REPAIR, PLEASE VISIT
www.venturer.com
