E - 8
Monitor
CONTROL REFERENCE GUIDE
1)
SCREEN switch
16:9 Wide-screen
4:3 Pan screen
2)
COLOUR control
Adjust for colour intensity.
3)
BRIGHTNESS control
Adjust the relative lightness or darkness of
the colour.
4)
STANDBY indicator
The LED will illuminate when the monitor is
in standby mode.
5)
CONNECT TO MAIN UNIT port (Input)
6)
Headphone jack
7)
Remote sensor
Receives the remote control unit signals.
8)
MONITOR ON/OFF switch
9)
VOLUME control
Adjust the volume.
Installation of Monitors
• Use supplied mounting straps installing the monitors onto the seat back in a car.
2) Tightly wrap the mounting
strap around the headrest.
SAFETY WARNING!
• This unit should never be used by the vehicle's driver or left unsecured in the vehicle while driving.
• If this unit is being used in your vehicle, be sure that it is secured or held safely, and does not obstruct
any safey device, including air bags or seat belts.
• All passengers should wear seat belts when using this unit in a moving vehicle.
• If in doubt, please contact your vehicle manufacturer for further advice.
1) Loop the safety band
around the headrest.
1
3
2
4
5
6
7
8
9
Содержание PVS1950D
Страница 1: ......
