E - 12
Notes:
• You may experience interference if the radio tuner function is selected while the television is working.
• Make sure to use the correct Audio/Video cable, connecting the plugs incorrectly may cause a weak signal.
• If you have a stereo VCR, make sure you set it to stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
C. Connecting to an amplifier or stereo receiver
This unit can play Dolby Digital, but only in two channels.
Connecting to a surround sound system
Analog connection
CONNECTING OTHER EQUIPMENT
Listening to another audio equipment
1. Turn on the Unit.
2. Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN
function.
Amplifier or stereo receiver
Right side of unit
(No need to connect the Yellow video plug)
(Red)
(White)
AUDIO/VIDEO
CABLE
AUDIO/VIDEO
CABLE
(included)
Audio equipment with
digital audio input jack
Rear side of unit
COAXIAL DIGITAL AUDIO CABLE
