E
3
Before turning on your television set for the first time, be sure to place it on a solid stable surface. To avoid
danger do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the
ventilation grid at the rear and be sure to leave sufficient gaps around the unit as shown.
QUICK INSTALLATION
1. Connect the TV antenna.
2. Connect the AC/DC adapter.
3. Press the
/ ON
button to turn on the unit.
4. Press the
ENTER
button.
5. Press the or button to select “Air” or “CATV”,
then press the
ENTER
button to start auto scan.
6. The unit will immediately search all channels for
those with adequate signal strength and store
those channels with signals in memory. The unit
will take a few minutes to finish auto scan and
after this is completed, the unit will switch to the
first channel found.
Proceed wtih auto scan?
Please select antenna type.
