page 5
tel. (0-22) 7519550; 7512031, fax (0-22) 7512259; 7511202, e-mail: [email protected]
C. Motor connection diagram
Fig. 3 (Motor connection - according to electrical documentation)
4. START-UP
After properly tightening the sensor and setting the appropriate vibration range setting
(table included in the fan operation and installation manual) using the knobs on the sensor (Fig.4).
As well as after the correct electrical installation we can start supplying power to the VMS system.
At the first start-up, the system is in the state of passivation (safety relay in the state of
opening control contacts, the RESET button lights up in blue), for the system to be reactivated,
press the RESET button. The transition to the state of reactivation of the system will be confirmed
by switching off the blue diode.
Fig. 4 (Setting of sensor ranges)
Off value
Value of the warning
Delay time,
recommended value 0
Delay time,
recommended value 0
