
2
D
E
D
E
SPE610BL
Repeat steps 1 and 2 for the remaining three sets of part (D) & (E)
Press part (D) in the groove of part (E). The holes in part (D) should
face away from part (E), except for holes where brackets are attched,
and RED marked end of it should be on the same side as on part (E).
Make sure part (E) and (D) are aligned with each other on both ends.
If you experience difficulty in lining up boards E and D
with the angle brackets, try the following:
1) loosen the screw on the angle bracket attached to
board E,
2) line up angle bracket hole with board D and attach
screw into bracket and hole on board D,
3) tighten screws on boards D and E until both boards
are pulled together and fit properly.