Vents TwinFresh Style Wi-Fi, Руководство пользователя, Страница: 23 / 32

23
www.ventilation-system.com
CONNECTING MASTER AND SLAVE VENTILATORS
AFTER CHANGING THE WI-FI PARAMETERS OF THE MASTER VENTILATOR REPEAT THE
CONNECTION STEPS!
WHILE COMPLETING THE CONNECTION MAKE SURE THAT THE SLAVED VENTILATORS
ARE WITHIN WI-FI COVERAGE OF THE MASTER VENTILATOR
To connect a Master and a Slave ventilators, set the DIP switches on the units to the Master and Slave positions, respectively (see section
Setting the ventilator operation mode using DIP switches
).
Then set up the Wi-Fi parameters of the Master ventilator.
To configure Wi-Fi parameters of the Master ventilator, do the following:
• Press and hold the
Ventilation
button on the master ventilator casing. Wait for the beep and the blinking of all the LEDs on the
unit casing.
• Repeat the steps with all the slave ventilators and wait for the beep when all the LEDs stop blinking on each Slave unit.
• Set the Master unit to the standard operation mode. Press and hold the V
entilation
button . Wait for the beep when all the LEDs
stop blinking.
Note:
if the home router works in conjunction with several Wi-Fi access points requiring connection of ventilators to different access
points:
• Connect the Master unit to the first Wi-Fi access point.
• Complete the connection with the first group of Slave units.
• Connect the Master unit to the second Wi-Fi access point.
• Complete the connection with the second group of Slave units.
SPECIAL VENTILATOR SETTING MODE
In the event of losing the Wi-Fi password or the master ventilator password or in other cases use the recovery Setup mode to restore
access to the ventilator functions. To enter the special Setup mode, press and hold the
Ventilation
button on the ventilator
casing for 5 seconds until the beep and blinking of all the LED lights.
The ventilator will continue in this mode for 3 minutes and then will automatically revert to the previous settings. To exit the Setup
mode immediately, press and hold the
Ventilation
button on the ventilator casing once again for 5 seconds until the beep and
shutdown of all the LED lights.
In this mode the following settings are available:
•
Wi-Fi network name:
Setup mode.
•
Wi-Fi password:
11111111.
•
The unit password is ignored.