Sensor speed controller
SRS-1
DESCRIPTION
The speed controller is equipped with a sensitive sensor panel made of hardened glass, with the
button
and two buttons for speed control from minimum (
) to maximum value (
).
MOUNTING
WARNING!
Make sure that the speed controller is not damaged. Do not operate a damaged speed controller! Do not install the speed controller on an
uneven surface! Do not apply excessive forces to avoid the product deformation.
Mounting sequence of the sensor speed controller:
Unfasten gently the front panel latches of the speed controller.
Unfasten gently the front panel latches of the speed controller.
Route the cable in the wall to the panel mounting place.
Attach the back panel to the wall or in the mounting box through the fastening openings.
Install the front panel on the latches.
86
62
4
52
86
31
21
R1,5
11
58
OUT
OUT
OUT
OUT
IN
L
L1
L2
L3
L4
Sensor speed controller mounting
OVERALL AND CONNECTING DIMENSIONS
Speed controller outline drawing
TECHNICAL DATA
Power supply voltage [V/Hz]
230 / 50-60
Maximum load current [A]
1
Cable cross section [mm
2
]
from 0,35 up to 1
Temperature range [°C]
from -10 up to +45
Humidity range [%]
5-80 (no condensation)
Service life
100 000 switching operations
Ingress Protection Rating
IP 30
Weight [g]
138
V95EN-02.indd 1
21.09.2015 12:56:32
