www.ventilation-system.com
6
VENTS 125 IFK
VENTS 125 IFT
VENTS 125 IFP
www.ventilation-system.com
6
N
L
+
LT L N
L
N
230
V / 50-60 H
z
L
QF
S
N
CONNECTION TO POWER MAINS AND CONTROL
The fan is rated for connection to single-phase AC 230 V / 50-60 Hz power mains.
Connect the fan to single-phase power mains through the automatic circuit breaker with a magnetic trip integrated into the fixed wiring
system.
The fan must be connected to power mains using durable, insulated and heat-resistant conductors (cables and wires) with corresponding
cross section (not less than 0.75 mm
2
).
The fan is connected to the terminal block located in the terminal box in compliance with the wiring diagram and the terminal marking.
The terminal clamp marking corresponds to the marking on the wiring diagram.
DISCONNECT THE UNIT FROM POWER MAINS PRIOR TO ANY OPERATIONS.
THE RATED ELECTRICAL PARAMETERS OF THE UNIT ARE GIVEN ON THE MANUFACTURER'S LABEL.
ANY INTERNAL CONNECTION MODIFICATIONS ARE NOT ALLOWED
AND RESULT IN WARRANTY LOSS.