Vents-us Airvents RH, Руководство пользователя

Страница: 10 / 16

CONNECTION TO POWER MAINS
Connection to power mains must be conducted in compliance with the automation user’s manual.
TECHNICAL MAINTENANCE
The unit operation requires regular inspection, dry cleaning of inner components, check-up and replacement of air filters in case of filter
contamination. 3-6 months after commissioning of the unit it must be inspected by a service expert for planned preventive maintenance
of the unit. Next maintenance operations must be conducted at least every 6-12 months.
Maintenance periodicity is determined by a service expert depending on operation conditions of the unit. Dust deposits on the inner
parts of the unit, especially in the electric heater, may lead to unpleasant odours. It is not a malfunction. Clean the unit to troubleshoot
unpleasant odours.
Open the service doors to access the filters.
AV03
Remove the two butterfly bolts that
fix the retaining clamp.
AV02
Open the two latches securing the
pressure plate.
Remove the filter elements.
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY
TO PERSONS, OBSERVE THE FOLLOWING:
BEFORE REMOVING THE FILTERS, SWITCH OFF THE EXTERNAL
AUTOMATIC CIRCUIT BREAKER AND LOCK THE SERVICE DISCONNECTING
MEANS, THEN OPEN THE HINGED SERVICE PANEL AND REMOVE THE
FILTERS CAREFULLY.
IT IS POSSIBLE TO CLEAN FILTERS WITH A VACUUM CLEANER OR RINSE
THEM WITH WATER AND DRY. MAKE SURE FILTERS ARE COMPLETELY DRY
BEFORE THEY HAVE BEEN INSTALLED BACK INTO THE UNIT.
OPEN THE UNIT FOR INSPECTION AND SERVICE NOT LESS THAN 2
MINUTES AFTER COMPLETE DE-ENERGIZING OF THE UNIT.
THE FANS ROTATION MAY BE STILL PRESENT.
IN CASE OF ANY ABNORMAL NOISE, SMELL AND COMPONENT
DEFORMATION IMMEDIATELY CUT OFF POWER SUPPLY TO THE UNIT AND
CONTACT
A SERVICE PROVIDER OR THE UNIT SELLER.
10
Airvents RH
www.vents-us.com