English
English
16
|
BabyGrow
User Manual
|
17
1. Make sure the product is powered off.
2. Pour 100ml (1/2 cup) of hot water into the tank, soak for 10 minutes and then use a
soft brush for cleaning.
3. After cleaning, drain the water tank.
4. If the accumulation of scale is not completely dissolved, repeat the previous step.
5. Pour some of the water into the tank and rinse, repeat the procedure as necessary
until the tank is clean.
6. Rinse the tank cover thoroughly under the faucet.
7. Before using this product again, please add 180ml (3/4 cup) of water in the tank to
complete a steaming cycle.
Blade components disassembly and assembly diagram:
Do Not Wash In Dishwasher
1) Hold the blending blade
by the plastic handle.
1) Place the seal accordingly on to the blade
2) Hold the plastic part under the blade in one hand and use the other hand to counter-ro-
tate the blade off from the jar.
Disassembly
Diagram
2) Rotate plastic handle
clockwise to disassemble the
blade.
Mixing blade seal
Repositioning the mixing
blade until seamless
TROUBLESHOOTING
Issue
Possible Cause
Solution
Product does
not start
steaming
This product is equipped
with a built-in safety lock. If
the blending jar is misaligned
with the safety lock on the
main body, the product will
not start.
Before starting, the blending jar
should be properly installed on the
main body.
Indicatator
Light Is Not Lit
The product is not connected
to a power supply.
Connect the plug to a power supply.
Blending jar is not properly
installed on the main body.
Blending jar should be properly
installed on the main body. (For
installation method refer to the
manual)
Product overheat.
Wait for at least 15 mins before you
start the blending process again.
Discoloration
On Product
Surfaces
Components changing color
due to contact with food.
This is a normal phenomenon. Food
can leave pigment stains. All parts
remain safe for use.
No Steam is
Produced
Water tank is empty.
Disconnect the power supply, then
add water to the tank.
Scale build up inside the tank. Clean the water tank (Refer to the
instructions).
Steam
Leaking From
Water Tank
The lid of the tank is not
properly closed.
Please check to confirm that
the water tank cover is securely
closed.
Blending jar is not properly
installed on the main body.
Install the blending jar on the main
body correctly (Installation method
Refer to the manual “Product use”)
The steam outlet of in the
water tank and the steam
inlet of tank lid were choked
up with dirt or scale.
Clean water tank and the steam inlet
of the cup lid.
Unpleasant
smell
Food lodged in the steam
heating compartment.
Follow instructions for descaling.
Should you have more questions or encounter other issues. Please contact Ventray
Customer Care [email protected]
CLEANING
