Introduction - 4
INTRODUCTION
Product Description
The Ventrac NE380 snow bucket is designed solely for the purpose of moving snow, slush, and ice from
small areas that do not have capacity to contain the cleared snow. The snow bucket is used to carry the
material to a suitable location.
The snow bucket is 38 inches (96.5 cm) wide and has a load capacity of 200 pounds (91 kg). It is hydrauli-
cally controlled from the operator platform.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Read-
ing the operator’s manual will help you become familiar with each specific piece of equipment. Under
-
standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
V
enture Products Inc. is pleased to provide you with your new
Ventrac snow bucket! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
