Ventrac LA162, Руководство оператора и чертежи запасных частей

Страница: 15 / 25

SERVICE
Service - 15
Cleaning & General Maintenance
For best results, and to maintain the fi nish of the
LA162, clean or wash the power blower after each
use to remove leaves, dirt, and other debris.
Lubrication
Grease the upper and lower fan shaft bearings after
every 50 hours of operation or once per season.
Usually 1-2 pumps of grease is suffi cient. If the
lower fan shaft bearing is subjected to water or other
harsh environments, it should be greased promptly
and/or more frequently.
Remove the gauge wheels and grease the axle
shafts as needed.
Drive Belt Replacement
Detach the power blower from the power unit.
Remove the V-idler pulley.
V-idler Pulley
Replace the drive belt.
Reinstall the V-idler pulley.
1.
2.
3.
4.
SERVICE
Always set the parking brake, shut off power
unit engine, remove the ignition key, and ensure
all moving parts have come to a complete stop
before inspecting components or attempting any
repair or adjustment.
Attention
If any component requires replacement, use only
original Ventrac replacement parts.