Ventrac KV550 V-BLADE, Руководство владельца/оператора и список запчастей, Страница: 4 / 23

A-1
INTRODUCTION
Prod uct De scrip tion
KV550 V-Blade
The KV550 V-Blade is designed for use on any Ventrac power unit and has all the
capabilities of a conventional blade with the added versatility of being able to sweep
both wings back for single pass clearing of sidewalks or sweeping both wings forward to
easily clear large areas without the need for repeated clean-up passes.
Through the auxiliary control lever on the Ventrac power unit, each blade wing is able to
angle forward or backward up to 30 degrees with infinite variability, each wing is
independently controlled with a 12V electro-hydraulic valve activated by a toggle switch
on the power unit.*
Options include:
•
6” Wide Top Flare Extension
•
6” Straight Edge Extension
• 6” Extension With 6” Top Flare
• Snow Containment Flap (Rubber)
•
Polyurethane Cutting Edge
Ventrac KV550 Spec i fi ca tions
Height Overall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 inches
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 inches
Width - Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 inches
- Straight with 6” Ex ten sion Op tion . . . . . . . . . . . . . . . . . . 67 inches
- “V” For ward/Back ward . . . . . . . . . . . . . . . . . . . . . . . 48 inches
- “V” For ward/Back ward with 6” Ex ten sion Op tion . . . . . . . . . . 57 inches
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 pounds
Blade wing height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 inches
An gling - Left and Right Blade . . . . . . . . . . 30 de grees for wards & back wards
Skid Shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ad just able
Cut ting Edge . . . . . . . . . . . . . . . . . . . . . . . . . . Re vers ible/Hardened
Ven ture Prod ucts, Inc. re serves the right to change these spec i fi ca tions with out no tice.
* To op er ate the KV550 V-Blade, the power unit must be equipped with one of the fol low ing
12V switch and plug kits:
Model Kit Num ber
3000 - Se rial Num ber HBA1347 and higher . . . . . . . . . . . . . . . . . 70.3007
3000 - Se rial Num ber HBA1346 and lower . . . . . . . . . . . . . . . . . . 70.3008
3100/3200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70.3016
4100/4200. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70.4039
4000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70.4046