Ventrac HM600, Руководство владельца/оператора и список запчастей

Страница: 12 / 40

OPERATION
C-2
Operating Techniques and Tips (cont.)
Travel to and from the area to be mowed should generally be done with the
mower raised in transport position by the tractor hydraulics. This saves the
wear-and-tear on the mower and needless scuffing and rolling over the various
surfaces between mowing jobs. Moderate speed should be used in transport in
order to maintain control and reduce the shock load from uneven terrain.
Disengage the PTO to prevent air turbulence over dusty surfaces and/or when
traveling over rough terrain.
When mowing, always place the front hitch S.D.L.A. lever in the FLOAT position
by moving it outward to the second position until the detent engages. The lever
will stay in this position after engagement.
Wet or lush grass has some tendency to build up under the deck. Periodic
checking, especially if mowing performance seems to be reduced, will let the
operator know if the deck should be cleaned.
Many operators prefer to mow back and forth in order to create the popular stripe
pattern in the cut grass. The full length roller very effectively rolls the cut grass
in the direction of travel.
Blades should be kept in good condition. Sharp blades will increase
efficiency and improve the quality of cut.
When mowing grass on level to gently rolling terrain, the tractor can be
operated in HIGH range in most conditions. If the grass is tall or mowing
conditions are difficult, use LOW range. When mowing slopes, always
use LOW range with the engine at full throttle.
Be very cautious when mowing slopes. It is
recommended that weight transfer be engaged and
that the front hitch is set in FLOAT position.