Introduction - 4
INTRODUCTION
Product Description
The EC240 sod cutter is designed to cleanly cut sod for flower beds, walkways, and lawns. With a cutting
depth of 0 - 2-1/2 inches (0 - 6.4 cm), the EC240 can be used to cut thick lush grass or even shave off the
last bit of dirt to prepare your work site.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Read-
ing the operator’s manual will help you become familiar with each specific piece of equipment. Under
-
standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
V
enture Products Inc. is pleased to provide you with your new
Ventrac EC240 sod cutter! We hope that Ventrac equipment
will provide you with a ONE Tractor Solution.
