RVC -1XC433 Rear View Camera Kit
Ventra Technology Inc.
Covina, CA. USA
www.ventrainc.com
Tel: 888 4183833
Installation layout
System Operation
•
Ensure the camera input (RCA) is connected to the vehicle’s monitor input
•
Additional settings in the vehicle may be required to activate video input. Please check the vehicle owners manual or consult with vehicle
factory certified technician for additional information
•
As each vehicle manufacturer incorporates its own settings, Ventra does not provide support on the setting and configuration pertaining to
the individual make and model of vehicle
•
Ventra is not responsible for any warranty issues or claims pertaining to the vehicle. Please consult with vehicle manufacturer prior to any
installation
Existing Monitor
OR
Secure cable connection by applying
heat shrink tube or electrical tape to
minimize movement from vehicle
vibration
EX4-CBL cable is not waterproof and
should not be exposed to direct sunlight,
rain or element. Cable should be placed
in weatherproof conduit or sleeve
Operation Guide:
1.
VLCD-7 monitor supports dual video input. If only 1 camera is connected, that camera will be primary, regardless of which input it is connected to
2.
If connecting 2 cameras,
•
Input 2
= Primary Camera
•
Input 1
= Secondary Camera
3.
To switch camera view, Press for momentary view of the second camera,
Or
if the secondary camera was powered on / triggered
by a switch (i.e. turn signal). Monitor will auto revert back to the primary camera after approximately 5 seconds.
VLCD-7 Operation ( If connecting to Ventra VLCD Monitor):
1.
Press SET key to Enter or Exit Menu
2.
Press
or
to navigate menu. Press
or to change setting
