venton SV-170, Инструкция по эксплуатации, Страница: 15 / 20

15
advisable; if this is necessary, they must be in accordance with the
safety regulations and their amperage capacity must not be less
than the maximum for the appliance.
•
Before each usage, check that the appliance is in good condition
and that the power cord is not damaged: if in doubt, check with a
professional, qualified technician.
•
The mains socket must be easily accessible in order to disconnect
the appliance with ease in case of emergency.
•
Position the appliance away from:
-
sources of heat (e.g. open flames, gas ovens, etc.)
- deposits of liquids (e.g. sinks, etc.) to avoid falling into or
splashing with water (minimum distance 2 metres).
- fabrics (curtains, etc.) or loose materials, which may obstruct the
ventilation grille; in addition, check that the front part is free of
volatile materials (dust, etc.).
•
The supporting surface must be stable, flat and even (so that the
appliance does not tip over).
ASSEMBLY
Warning:
the fan may be used only if it is fully and properly assembled, that
is to say, complete with the base and the grille.
Warning:
always disconnect the appliance from the mains supply before
assembling. if in doubt, have the operation checked or carried out by a
qualified technician. For the assembly refer to Fig. 1.
ASSEMBLE OF BASE
•
Set the column in place on the base and secure it using the “L”
screw with washer while also engaging the counterweight.
•
Make sure column and base and counterweight are firmly coupled.
•
Insert the upperpart tube into underpart, tighten with the height
adjustment knob,
•
Insert the neck and the motor part into the upper part column and
tighten with the height adjustment nut,
•
If necessary, you can only set the underpart column use as the floor
fan. Make sure the Set Screw is tightly secured.