www.ventevinfra.com
800-851-4965
Co-Locating Mount for RPSMA Access Points
and Co-Located Ventev & Aruba Antennas
Overhead Attachment Point
Access Point Mounting Bar
Antenna Mounting Tray
Locking Screws
Mounting Instructions
1. Connect the Access Point’s plastic clip to the Access Point (if required). Consult the Access Point
documentation for plastic clip directions.
2. Place the Access Point clip against the Co-Locating Mount’s Mounting Bar and rotate so that plastic
clips fit over the Mounting Bar and holds the Access Point in place.
3. Remove nuts and washers from Antenna mounting bolts. Push the Antennas mounting bolts
through the holes in the Antenna Mounting Tray.
4. Re-attach antenna washers and nuts to hold antenna securely against Mounting Tray. Run antenna
cables through cable management clips and attach cable connectors to Access Point.
5. Bolt the Co-Locating Mount onto the preferred overhead location. Note: Overhead mounting
hardware must be purchased separately by user.
6. Position antenna (if required) - Loosen the Antenna Mounting Tray’s locking nuts. Rotate the
Antenna Mounting Tray to achieve the desired antenna position. Tighten the locking nuts.
