Ventair Stanza STA1203WH, Руководство по установке

Страница: 8 / 12

WARNING:- For your safety, Ensure the mains supply is switched off and
isolated before performing any electrical work.
Installing the Remote Control
The remote handset comes factory paired with the remote receiver, but if you wish to pair a remote
hand piece to multiple fans, see below.
Step 1 : Turn “OFF” power at isolation switch.
Step 2: Turn “ON” power at isolation switch and within 10 seconds, Press LIGHT “ON” button for 3-4
seconds until a “Tick-Tack” sound is heard. (Repeat steps above if not successful).
How to Operate using the Remote control.
1. Use Eco/Med/High buttons to alter the fan speed.
2. “OFF” button will turn the fan off only.
3. Turn Light “ON/OFF” with the light buttons.
4. Press the “STEP DIM” button to transition through 75%, 50%,
25% then back to 100% of light output.