5
INSTALLING THE CANOPY
Fit upper canopy about 5mm off the ceiling. To avoid unwanted noise, secure it into position with canopy screw.
CHANGING THE LED LIGHT TEMPERATURE
The LED on the fan with light models have a distinctive switch to
change between three colour temperatures – Warm, Natural
and Cool.
Twist the diffuser anti clockwise to remove, you will see the tri
colour switch button on the LED panel. Press the button once,
the light colour will change, press again and the light color will
change again. It’s circulation changes from Cool white, Natural
and Warm White.
USING A STANDARD WALL CONTROL
1. Turn control know for fan speeds Eco/Med/High
2. Flick switch to ‘On’ Light will be 100%
3. While ‘On’ flick switch ‘Off’ then ‘On’ again within 2 seconds, the light will drop down to be at
75%. Continue the same process to reach 50% and 25% light level.
NOTE:
If light switch is ‘Off’ for more than 2 seconds, the light will revert to 100% light setting
when next operated.
