6
Step 4: Drill two holes (
Ф
8*40) on the wall, its distance is 55mm. Install the hanger
(No.4 in accessories list) on the wall with 2pcs M6*60 (No.3 in accessories list) by
the spanner.
Step 5: Fix the heater on the hanger with the bolt M8x60 (No.5 in accessories list),
fasten the nut M8 (No.5A) by hand and Phillips Screwdriver.
Step 6: Tilting angle adjustment. Loose the nut M8 (No. 2B), then adjust the tilting
angle by hand. The angle is to be set up to 45 degree.
Step 7: Finally, fasten the nut M8 (No. 2B) by hand and Phillips Screwdriver.
