6
WIRELESS CONTROLLER (Available stock ref. 426035)
The selection switch in the Multivent unit and the switch in the hand held transmitter must be set exactly the same.
The factory setting is 5678 but it is inadvisable to retain this setting.
a) The Multivent Selection Switch.
Located as shown in Fig 3.
b) The Transmitter Selection Switch
•
Remove battery compartment cover on the back of the transmitter unit.
•
Set the transmitter selection switch to the same number sequence as used for the Multivent receiver,
see Fig 4.
•
Connect battery terminal connector to the battery.
PP3 9V BATTERY
SELECTION SWITCH
Fig 3
Fig 4
