a
iroon
centre
.
co.uk
The Award Winning Ventilation Specialists
For expert advice please speak to a specialist on
0800 8
6
5 45
67
or
0121 250 2186
Mon-Fri: 8:30am - 6:30pm | Sat & Sun: 11am - 5pm
For expert advice please speak to a specialist on
2
READ AND SAVE THESE INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING
INSTALLATION
Air moving equipment may present mechanical, electrical or noise hazards. To minimise risks
associated with these potential hazards, it is essential that safety, installation, operation and
maintenance instructions are followed. Implementation of these instructions should always be
undertaken by technically competent personnel.
Installation work, both mechanical and electrical, must be undertaken in accordance with the
safety and installation instructions before switching on the unit.
Maintenance work should not be attempted before switching off and isolating the fan and its
control from the electrical supply and ensuring that it cannot be accidentally turned back on
again. It is essential to ensure that rotating parts have come completely to rest before
maintenance work commences.
All fans generate noise during operation. Dependant on the installation, sound attenuators or
other acoustic treatment may be necessary to achieve acceptable noise levels in the ventilation
area or the area surrounding the fan installation.
IMPORTANT
1. All electrical connections should be made by a properly qualified electrician. The fan must
be sited and connected in accordance with current IEE Wiring Regulations, BS7671 (U.K.) or
the appropriate standards in your country.
2. DO NOT use this appliance when the following are generated or present: Excessive grease
or oil laden air, corrosive or flammable atmospheres.
3. When the fan is installed in a room containing a fuel burning appliance, the installer must
ensure that the air replacement is adequate for both the fan and the fuel burning appliance.
4. Site away from direct sources of heat, ambient temperature range 0
o
to 70
o
C.
5. When installing unit, take care not to damage electrical or other hidden utilities.
6. Check the details on the rating label for correct voltage & frequency.
7. It is the responsibility of the installer to ensure that all aspects of system design are taken
into consideration.
8. Due to the weight of the unit it is recommended that two persons are involved in the
installation.
STORAGE/INSTALLATION
If the unit is to be stored for a long period of time the fan impeller must be rotated by hand at
monthly intervals to prevent hardening of the lubricant and corrosion or static indentation of the
bearings.
Each unit is supplied with 4-off eye bolts for hanging, as standard.
A range of accessories is available from Vent-Axia Limited for this product.
MOUNTING
Jupiter units are typically installed at high level. We recommend that the suspension kit 457490 is
used. This consists of 4 lengths of chain and hook sections. The hooks should be positioned into the
4-off eye bolts before fixing in place.