ENGLISH
LED Console Stand
For use with Nintendo Switch & OLED Model
Model number: VS4928
User Guide
Contents:
1 x LED console stand
Installation & Use
1. To fit your Nintendo Switch Dock into the LED
console stand simply place the dock into the stand
and plug the USB cable into the back of the dock.
To power ON/OFF, press the power button.
2. To colour change, a short press is required for each
of the 8 colour modes. The final press will enter
colour changing cycle mode. To get a single pulse
colour, simply hold down the button for 3 seconds
on the desired colour when lit. To return to solid
colour, simply press the button again.
3. Press to shift through the 6 brightness options.
Care & Maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you to protect your warranty coverage:
• Keep your device out of the reach of small children.
• Keep the device dry. Precipitation, humidity and all types
of liquid or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, allow it to dry
completely.
• Do not use or store the device in dusty, dirty areas, as moving
parts and electronic components of your device can be
damaged.
• Do not use or store the device in hot areas. High
temperatures can shorten the life of electronic devices,
damage batteries and warp or melt certain plastics.
• Do not use or store the device in cold areas. When the device
returns to its normal temperature, moisture can form inside
the device and damage electronic circuit boards.
• Do not drop, knock or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the device.
Brightness
control
Colour mode
control
Power
USB cable
