VENOM ProPowerHD Commercial Series, Руководство по эксплуатации

Страница: 8 / 16

PRO POWER HD
0609
4
venompower.com
USING YOUR CHARGER
BALANCE CHARGE OPERATION
For the charger to operate it must be plugged into an AC power source and the ON/OFF
switch located on the left side of the unit must be in the ON position.
1. Connect the battery main lead output to one of the two XT90 charge ports using a plug
converter as necessary.
2. Connect one of the two included balance blocks to the same charger channel.
3. Connect the battery balance lead output to the appropriate 2S-6S JST-XH port of the
balance block.
4. Press the CURRENT button to choose the appropriate working current 5A / 10A / 15A /
20A / 25A.
5. Press the MODE button to select the charge mode.
6. To select between LiPo (4.2V/cell) and LiHV (4.35V/cell) press the CURRENT
and MODE buttons simultaneously for 4 seconds.
7. Press and hold the START/STOP button for 2 seconds to initiate the balance charge. An
audible tone will sound and the LED channel indicator will glow RED upon initiation.
8. The balance charge process is complete when the LED channel indicator glows GREEN.
NOTE - Pressing the START/STOP button during an active
charge will terminate the process.
NOTE - Charging a LiPo battery using the LiHV setting can cause
permanent damage to the battery and even cause a fire.
STORAGE CHARGE OPERATION
Storage mode is provided to return the battery to 3.80V/cell helping to prolong battery life
during extended periods of rest. As needed a balance charge or discharge will be applied to
the battery to achieve the 3.80V/cell target.
1. Connect the battery main lead output to one of the two XT90 charge ports using a plug
converter as necessary.
2. Connect one of the two included balance blocks to the same charger channel.
3. Connect the battery balance lead output to the appropriate 2S-6S JST-XH port of the
balance block.