Charging / Discharging Batteries Can Be Hazardous
CAUTION:
1. Always connect this device to a charger before connecting a battery.
2. DO NOT connect more than a single battery pack to the device at one time.
3. Battery packs when improperly charged or discharged, can sustain permanent damage, catch
fire, explode, and cause personal injury.
4. Before attempting to charge or discharge a battery, first read the safety warnings and
instructions provided with your battery. Contact the battery manufacturer if these instructions
were not provided or are unclear.
5. Before charging or discharging any battery, carefully inspect the pack to ensure no physical
damage, swelling or “ballooning” is evident. Such signs indicate that a dangerous problem
exists with the battery that could lead to catastrophic failure including fire and explosion.
6. DO NOT allow metal or other conductive materials to touch any of the metal contacts of the
device when a battery pack is connected.
7. Immediately discontinue the charging or discharging of a LiPo battery if it begins to swell or
“balloon”.
INTRODUCTION
EXTERIOR OF UNIT
FEATURES
OPERATING INSTRUCTIONS
SAFETY WARNINGS
Thank you for purchasing the Venom All Pro In One Charge Adaptor Board.
Charging batteries can be hazardous!
Read this manual in its entirety before attempting to use this product. Damage
resulting from misuse or modification will void your warranty. Venom will not be
held responsible for any incidental damages or injury to persons that may result
from improper use of this product.
In purchasing this product the buyer/user agrees to bear all responsibilities of
these risks and not hold Venom, its distributors (owners and employees) and/or
retailers responsible for any accidents, injury to persons, or property damage. If
you do not agree with these conditions, please return this product to the place
of purchase.
Failure to follow these instructions can result in severe and permanent damage
to batteries and the charger, cause personal injury, and even start a fire.
The Venom All In One Charge Adaptor Board was designed and is intended for
use with radio controlled vehicle batteries only and any other uses are not
authorized, recommended or warrantied by Venom.
If you have read this entire manual and still are unclear regarding any of the
functions, warnings, or safety instructions, please contact our customer service
department PRIOR to using this product.
1. Connect the Venom Pro All In One Charge Adaptor Board to a compatible
charger using the red and black banana plugs as well as the white JST-XH
balance plug (for lithium batteries).
2. Connect the battery charge lead and balance lead (for lithium batteries) to
the appropriate port(s) of the adaptor board.
3. Immediately after use, unplug the battery from the Adaptor Board prior to
unplugging the Adaptor Board from the charger.
In the event of an unexpected connection break error from the charger be
sure to confirm the integrity of the 30A mini fuse located at the wire exit end
of the Adaptor Board.
8. Always keep a class D chemical fire extinguisher nearby, in case of fire when charging or
discharging battery packs.
9. Be sure to understand the specifications of the battery pack to be charged or discharged. If the
charger program is set up incorrectly the battery pack can be severely damaged, catch fire, and
cause personal injury. Refer to the battery label for the specifications of your battery pack or
contact the manufacturer.
10. Under no circumstances should you charge or discharge a battery that has swollen
“ballooned” or been damaged in any way. Refer to the safety warnings provided with
your battery for further instruction.
11. Batteries on charge or discharge MUST remain under constant observation so that you may
react quickly should any problems arise.
12. This product, the charger, and the battery to be charged or discharged should be set upon a
heat resistant, non-flammable/combustible and non-conductive surface away from any
flammable/combustible materials.
13. Never charge a battery pack that feels too hot to the touch. Always allow a battery to cool to
ambient temperature before charging.
14. Always use a LiPo safety sack or other fireproof container when charging or discharging battery
packs.
15. Charge each battery pack individually. Never charge battery packs in series. Charging packs in
series may result in improper charger cell recognition, improper charging rate, and over
charging that may lead to fire or explosion.
16. Never leave the charger unsupervised when it is connected to its power supply. If any
malfunction is observed immediately terminate the process and refer to the operation
instructions.
17. Keep this device away from dust, water, heat, direct sunlight and vibration.
18. Do not disassemble, modify, or attempt any form of repair of this device.
CAUTION - Always check polarity before connecting a battery.
Reverse polarity may cause irreversible damage to this device
and the connected battery charger.
CHECK POLARITY
• Compatible with most popular connector types:
EC5
®
, XT60
®
, Deans
™
, EC3
™
, JST, JST PH 2.0 Tamiya
®
, RX, Venom UNI & UNI 2.0
• Built in JST-XH balance block for 2-6S LiPo/LiHV
• Fused overcurrent protection
30A FUSE
EC5 PORT
TAMIYA
PORT
XT60 PORT
EC3 PORT
DEANS PORT
JR/FUT
PORTS
JR/BEC PORT
2S-6S
BALANCE PORTS
JST/PH 2.0
PORTS
