VENOM Dual 3 Cell AC/DC LiPo Balance, Руководство пользователя

Страница: 7 / 12

LiPo
PW Err
0.0V0.0A
00:00:00
Charger Warning & Error Messages
LiPo3S
CHGING
12.6V0.3A
00:01:46
LiPo3S
FULL
12.6V0.3A
00:16:35
Input Voltage Error:
The charger input voltage must be between 10 and 18
volts to operate properly. If input voltage is lower or
higher then you will get a “PW Err” power error.
Charging Status Indication:
“CHGING” will be shown on the left side of Interface 1.
Full Charge Indication:
“FULL” will be shown on the left side of Interface 1 and
current rate will “0”.
WARNINGS
Please read this manual carefully before use.
Please keep this product away from water, corrosive gasses, dust and wet environments.
PAGE 5
0689
Each battery must be the same chemistry when charging two batteries at the same time!
Incorrect connections may damage the battery, or destroy the charger and void all warranties.
This charger will automatically begin charging within a few moments of the balance
plug(s) being connected. You MUST set your AMP rate to match the capacity of the
battery(ies) being charged.