Discharge Statistics
Discharge Time:
Max Current:
Vmax-Vmin:
Min Voltage:
Min CellVol:
Max Temperature:
Health State:
16:49
-20.290A
0.187V
9.610V
3.258V
51.1
99%
Charge Statistics
Vmax-Vmin:
Min CellVol:
FULL CAP:
Max Temperature:
Health State:
BalanceState:
0.078V
4.200V
5653mAh
5.7
99%
0
79%
-10.049A
11.657V
Discharging
00:26 07:25
77%
3.837A
12.026V
4.010V
4.011V
4.008V
Charging
00:45
CHARGING MODE
DISCHARGE MODE
ERROR MODES
Connecting your battery to a charger and initiating a charge will put the battery into “Charge Mode”. Charge
this battery as you would normally charge your original DJI battery. You will notice that once the charge starts,
the screen will automatically light up giving you important information like the estimated time remaining for the
charge, the percentage the battery is charged, the amperage currently going into the battery and the overall
voltage reading as well as the individual cell voltages.
Pressing the button once will give you additional charge statistics like the Vmin-Vmax difference, max cell
voltage, full capacity, maximum temperature (in Celsius), health state and balance state of the pack. This
information is most useful when the battery is done charging, as the statistics will actively change while the
battery is being charged.
When your battery is plugged into your drone and powered on, it will display the “Resting Mode” information.
When your DJI Phantom 2 is in flight, it is in “Discharge Mode”. The screen will display the percentage of
power left in the battery as well as the estimated flying time left (Left side of the screen, represented in
minutes) and the actual flight time (Right side of the screen, represented in minutes and seconds) as well as
the current amp draw and overall voltage of the battery.
When your flight is done, the screen will show you the “Battery Info” from the “Resting Mode”. However, if you
press the button once you will get the “Discharge Statistics” screen that will show you the overall discharge
time, maximum current draw (in amps) while you were flying, the Vmax-Vmin, Minimum voltage in the battery,
the lowest cell voltage, the maximum temperature the battery reached (in Celsius) and the health state of the
battery.
CHARGING MODE
DISCHARGING MODE
DISCHARGE STATISTICS
CHARGING STATISTICS
VENOM GROUP INTERNATIONAL
14028 N. Ohio Street
Rathdrum, Idaho 83858 USA
North America: 800.705.0620
Outside North America: 208.762.0620
PART #:15150
CUSTOMER SERVICE
For Customer Service issues and the
quickest warranty service please visit
www.venom-group.com and click the support tab
Please read and fully understand all included LiPO battery warnings
and precautions BEFORE using this product.
NOTE:
NOTE:
ERR1
5488mAh
12.572V
5
Battery INFO
ERROR ONE
Over Discharge Condition.
Parameter Value is 2.7V ±15mV
ERR2
5488mAh
12.572V
5
Battery INFO
ERROR TWO
Over Discharge Condition.
Parameter Value is 4.3V ±15mV
