INTELLIGENT LiPO BATTERY
DJI PHANTOM 2
INTELLIGENT LiPO BATTERY
DJI PHANTOM 2
3S 5500mAh 11.1V LiPO (61.05 WH)
3S 5500mAh 11.1V LiPO (61.05 WH)
Congratulations! You’ve purchased the most advanced, state of the art LiPO battery
available for the DJI Phantom 2 family of multi-rotor models. This is a quick guide to
help you get started with your new battery. You will find that there are multiple
information screens you can access depending on the batteries current activity. This
guide will help you navigate those screens like a pro. But first, you need to know
how to turn the battery on.
100%
12.582V
Battery INFO
5500mAh
1
Battery INFO More...
Serial Number:
Health State:
Soft Version:
Produce Date:
Current:
4.194V 4.189V 4.189V
1482
99%
V01.04
14.12.11
0.020A
TURNING THE BATTERY ON AND OFF:
RESTING MODE
To power on the battery, press the button on the end of the pack twice within one second holding the button
down on the second press. The green LED lights should begin to illuminate. When all four green LED’s are lit,
your battery will power on.
To turn the battery off, use the same method by pressing the button twice within one second, holding the button
down on the second press. The LED lights should begin to turn off. When all 4 LED’s are not lit, your battery is
off.
There are 3 modes the battery can be in depending on what it’s doing. There’s the Resting mode, where the
battery is simply waiting to be used. This could be when the battery is on, but not in the model, or when it’s
plugged into the model, but the model is not being flown.
The next mode is the Charging mode. This happens when the battery is plugged into your charger and you are
increasing the voltage of the battery.
The last mode is the Discharge mode. This mode is engaged by using the battery in your DJI Phantom 2. Your
drone must begin flying for this mode to start. Now let’s cover the details of each mode.
Without the battery plugged into the charger, power on the battery. This mode will also be activated when the
battery is turned on while plugged into the Phantom 2, but the drone is resting and not being flown. The
screen you will see is the “Battery Info” screen. This tells you the percentage the battery is charged, the
amount of power (represented in mAh, or milliamp hours) currently available in the pack, the resting voltage of
the battery, and finally in the lower right corner of the screen, the amount of times the battery has been
“cycled” or discharged and charged back up again.
By pressing the button once you can see additional information like the serial number, the health state of the
battery (All new batteries will start at 99%), the software version, the production date as well as the current
draw and individual cell voltages.
POWER
BUTTON
LED
LIGHTS
LCD SCREEN
RESTING MODE BATTERY INFO
RESTING MODE BATTERY
INFO MORE
SEE BACK FOR MORE DETAILS
