Venini VEF61.1GG, Инструкции по установке и эксплуатации

Страница: 12 / 24

Cooktop burner operation
For cookers fitted with the optional glass lid the glass lid must always be in
the open position when the cooktop burners are operating.
First time use
Thoroughly clean
the
cooktop with warm soapy water prior to first use.
Cooktop burner operation
The individual burner position on the cooktop is indicated by a graphic placed above the
burner control knob. Two further graphics indicate the 'full on' and 'turn down ' positions.
Ignition
1. To operate the individual cooktop burners depress the appropriate control knob and
turn anti-clockwise to the spark symbol. Push to activate the electronic ignition.
2. Once
the
flame
has stabalised
turn the knob to the desired setting. Keep
the k
nob
depressed for 5 seconds to activate the flame failure device.
3. If the flame goes out repeat the procedure.
NOTE:
I
f the burner does not ignite within 5 seconds, wait 5 minutes before reigniting.
Cooktop burner adiustments
The control knob is used
to adjust the flame of the gas burner.
'High flame' graphic =
highest output
'
L
ow flame' graphic = lowest output
Use
the
'High flame' setting to bring the pan to the boil, then adjust the flame to maintain the
required pan temperature. Burner flames should be clear blue, with no yellow tipping. If the
burners show any abnormality check that the burner
heads
are correctly located. lf
satisfactory performance cannot be abtained after consulting the trouble shooting guide,
contact the authorised service provider.
Please state the cooker model
number to the
service agent. The model number is stated on the data plate. The data plate is located on
the inside of the oven door, centre bottom.