REMO
VE OEM DOOR
INS
TALL DOOR
HARNESSES
INS
TALL BUCKET
FINAL INS
TALL
ADJUS
T DOOR
25
CURVE™ Door AP 113, AP 123, AP 7000
Using Self-Tapping Screw (VE7373K), mount the vend buck-
et to the door as shown, repeat this step for the opposite
side.
Next, using the 5/16” nut driver, fasten
Keps Nut
(VE7358)
to sides on the vend bucket (A), repeat
for opposite side. Then, using self-tapping screws,
mount the bracket to the bottom of the door (B) with
1/4” hex socket or cordless drill, repeat for opposite
side.
Then, tuck the drop sensor cable on the inside of
the door and use existing cable clamp to secure, if
necessary.
Then, attach the support bracket to the studs as shown
above, and ensure that the drop sensor cable is positioned
between the bracket and the door. Repeat for opposite side.
INSTALLATION GUIDE
4
5
(Continued next page)
Door
Vend Bucket
INSTALL THE VEND BUCKET
NOTICE
TO FACILITATE POSITIONING AND ALIGNMENT, ONE PERSON SHOULD HOLD THE VEND BUCKET FROM INSIDE THE
MACHINE TO ALIGN WITH THE MOUNTING HOLES. THE SECOND PERSON ON THE OTHER SIDE OF THE MACHINE
SHOULD ENSURE THAT THE VEND BUCKET ALIGNS PROPERLY IN THE OPENING
6
7
Cordless Drill
Self-Tap Screw
Support Bracket
Push Vend
Bucket Flap
Sensor
Cable
Vend Bucket
Bottom of
Door
Keps Nuts
Support Bracket
Self-Tap Screw
