Vendo VUE 30 Скачать руководство пользователя страница 132

Страница: 132 / 141

GFV Cabinet, set Y home adjustments.

WORK CONTENTS : Powering on the Cabinet.

Note: .

STEPS: (1) Before connecting the Power Box to Line Voltage (VAC) make connections
from the door harness to the power box.

(2) Connect the Power Box to Line Voltage (VAC).

(2a) At power up the Cabinet should go through the following sequence:

The optic light should be on (red beam) on the hand assembly.

The display on the front of the machine should go through the boot sequence.

The hand should go to the home position, lower left hand in the door.

The delivery bucket and delivery flap will go through the boot up sequence, open / close.

Light
harness

Door
harness

Test Power

Optic red
light is
on(lit), and
the hand is in

Содержание VUE 30














































































































































Результаты поиска

Содержание VUE 30

Отзывы:

Похожие инструкции для VUE 30

Бренды по названию

Популярные бренды

Vendo VUE 30, Руководство пользователя

Результаты поиска

Содержание VUE 30

Отзывы:

Похожие инструкции для VUE 30

Бренды по названию

Популярные бренды