Instruction for installation,
maintenance technician
and final user.
VENDING MACHINE
Rev. 00
Models: VDI 100 – 189 – 217 - 254
Pag. 32 di 46
5.3
Replacing neon lamps
To replace a neon lamp, work as follows:
•
Open the door of the vending machine using the special key supplied (ref. Fig. 6.1).
•
Press the luminous green LIGHT SWITCH pushbutton to disconnect power to the neon lamps:
switch from position “ 1” to position “ 0”
CAUTION: AT THIS STAGE ONLY THE POWER CIRCUIT OF NEON LAMPS IS CUT OFF, THE VENDING MACHINE IS
STILL POWERED
•
By means of the inspections holes (ref. Fig. 6.2) take out the neon lamps to be replaced by the two
fastening clips
•
Disconnect the neon lamp from its wiring
•
Wire up the new neon lamp and fasten it to with the clip
Once you have replaced the neon lamp work as follows:
•
Press the luminous green LIGHT SWITCH pushbutton to switch on the neon lamps, turn from
position “ 0” to position “ 1” ;
•
Re-close the door of the vending machine and make sure you lock it using the access key supplied