Vendo V-MAX 576, Руководство по эксплуатации и ремонту

Страница: 52 / 138

3/2002
PC-18
SET-UP AND CODE DESCRIPTION (CONTINUED)
Over-Ride Selection Blocking
If selection button two is pressed at the “bLCn” prompt, the controller will enter the Selection
Blocking Over-Ride Enable Option. Upon entry into this program the display will show the
current setting “bLCn”. Pressing selection button one will toggle between “Y” for enable and
“N” for disable. Pressing selection button three will save the currently displayed setting and
return the operator to the “OVEr” prompt.
bLCn
“Y” = Enable selection blocking.
“N” = Disable selection blocking.
Over-Ride Low Energy Status
If selection button two is pressed at the “nrGn” prompt, the controller will enter the Over-
Ride Low Energy Option. Upon entry into this program the display will show the current
setting “nrGy” for enable and “nrGn” for disable. Pressing selection button three will save the
currently displayed setting and return the operator to the “OVEr” prompt.
nrGn
“Y” = Enable Over-Ride Low Energy blocking.
“N” = Disable Over-Ride Low Energy blocking.
Over-Ride Discount
If selection button two is pressed at the “dSCn” prompt, the controller will enter the
Discounting Over-Ride Enable Option. Upon entry into this program the display will show the
current setting “dSCy” for enable and “dSCn” for disable. Pressing selection button three
will save the currently displayed setting and return the operator to the “OVEr” prompt.
DSCn
“Y” = Enable discount over-ride.
“N” = Disable discount over-ride.