VendNet 3120-GF12 II, Руководство по обслуживанию

Страница: 13 / 20

11
Table 4. Vend Options Mode
PRESS DISPLAYS
TO
TOGGLE
PRESS
DESCRIPTION
Fcry
= On
Force Vend Option: Purchase necessary to receive change from a paper bill, overriding
the "coin return" command.
[ A ]
Fcrn
= Off
[ A ]
A purchase is not necessary to receive change for a bill insertion.
Escy
= On
Bill Escrow Option: Returns the bill to the customer when no vend is made and the coin
return button is pushed. (Must have a validator with escrow capabilities.)
[ B ]
Escn
= Off
[ B ]
Gives change for bill when the coin return button is pushed.
nULy
= On
Multi Vend Option: Multiple purchases can be made as long as adequate credit is
available. After 20 seconds of no activity the change will be returned automatically.
[ C ]
nULn
= Off
[ C ]
Customer immediately receives the change after a vend.
Cany
= On
Can Drink Option: Host can run a satellite can drink vendor. Selection motors are
configured upon exiting the
Service Mode if this option has been changed.
[ D ]
Cann
= Off
[ D ]
Satellite can drink vendor selections are disabled.
FrEy
= On Free Vend Option: All product vended at no charge to customer.
[ F ]
FrEn
= Off
[ F ]
Individual price settings used.
Fchy
= On Fast Change Option: Change is returned as soon as a selection is made.
[ 2 ]
Fchn
= Off
[ 2 ]
Change is returned after a selection is made.
COIN MECHANISM
(Applies to U.S. currency coin mechanisms only)
Load the coin mechanism coin tubes with
nickels, dimes and quarters. See Figure 8.
Table 5. Coin Tube Capacity
25¢ OPTION
5¢ 10¢
HI 25¢ LOW 25¢
FULL LEVEL 68-69 98-99 66-67 8-9
LOW LEVEL 7-8 10-11 8-9 8-9
The coin mechanism pays out nickels, dimes and
quarters from self-loading, high capacity change
tubes in the least number of coins available.
CAUTION:
Do not plug or unplug coin mechanism
with the power on!
Option Switch Setting
Use the three option switches to select the type
of coins to be accepted along with the number of
quarters that will be stored in the 25¢ coin tube
for overpayment. The coin mechanism option
switches have been factory set to OFF.
To change settings:
Turn the power switch OFF.
Remove the coin acceptor (upper section)
portion of the coin mechanism. See Figure 9.