VENDAPIN VendaFax VF-1 Скачать руководство пользователя страница 16

 

Corporate Headquarter: 16381 Cherokee Road Brooksville, Florida 34601 352-796-2693 

Factory: 21B Squires St. Cortland, NY 13045 607-428-0627

 

Notice 

The material contained in this manual is subject to change without notice. No part of this manual may 
be reproduced or used in any form or by any means, electronic or mechanical, including photocopying 
or electronic transmission or other means of reproduction or distribution without prior written consent 
of VENDAPIN. The drawings, specifications, and other technical information contained in this manual 
are the property of VENDAPIN and shall not be copied, reproduced or used in any way, in whole or in 
part, as the basis of manufacture or sale of similar items without the prior written consent of 
VENDAPIN. 

 

FCC Warning 
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used 
in accordance with the instructions in this manual may cause interference to radio communications. 

Operation of this equipment in a residential area is likely to cause interference, in which case the user 
at her/his own expense will be required to take whatever measures may be required to correct the 
interference. 

 

Information to User 
This equipment must be installed and used in strict accordance with the manufacturer’s 
instructions. 
 

VENDAPIN is not responsible for any radio or television interference caused by unauthorized 
modification of this equipment or the substitution or attachment of connecting cables and equipment 
other than those specified by VENDAPIN. The correction of interference caused by such unauthorized 
modification, substitution or attachment will be the responsibility of the user. 

 

One-Year Warranty and Service Policy 

VENDAPIN LLC. warrants to the purchaser that this VENDAPIN product, hereinafter called “the 
unit,” is free from defects in materials and the workmanship for a period of one year from the date of 
purchase. If any such defect is discovered within the first 90 days of the warranty period, VENDAPIN 
LLC will repair or replace the unit free of charge. If any such defect is discovered after 90 days and up 
to the end of the one-year warranty period, VENDAPIN LLC will repair the unit free of charge. All 
warranty repair and replacement actions are contingent on verification of the defect(s) or 
malfunction(s) and upon prepaid delivery of the unit to VENDAPIN LLC, 21B Squires St., Cortland, 
NY, 13045 by parcel post, common carrier, UPS or other commercial means. This warranty does not 
apply to normal wear, to tampering or alterations resulting in cracked or broken components, or to units 
damaged by excessive heat, cold or moisture. 
 

To preserve your rights under the warranty, you must provide proof of purchase for the returned unit. 
RETURNING THE PRODUCT REGISTRATION “CUT-OUT” CARD enclosed in this manual with 
the new unit will also register the warranty by serving as proof. Otherwise, a copy of the sales invoice 
showing the serial number of the returned unit must accompany the unit as proof of purchase. 

 

Содержание VendaFax VF-1



















Отзывы: