VENCO VP6F, Инструкция по установке и эксплуатации

Страница: 5 / 36

VENCO VENTURO INDUSTRIES LLC
CINCINNATI, OHIO
H100
SPECIFICATIONS
VP/VC-6F
04-11-19D
DATE SECTION
SUPERSEDES
TITLE
09-26-02C
6339
VP/VC-6F HOIST SPECIFICATIONS OVERVIEW
VP6F - Designed for the '99 - 2015 Ford SuperDuty pickup truck frame using pickup box
VC6F - Designed for the '99 - 2015 Ford SuperDuty pickup truck frame using contractor bed (not
using pickup box)
Hydraulic Power Unit Options
ES - Electric (12 VDC) single-acting hydraulic power unit (power up and gravity down)
ED - Electric (12 VDC) double-acting hydraulic power unit (power up and power down)
Specifications
Weight - 265 lbs (ES/ED)
Cylinder - 3-1/2" dia, 13" stroke
Operating Pressure - 2800 psi "up" (ES/ED) and 650 PSI "down" (ED only)
Capacity
VP - (6000 lb (suggested maximum capacity for pickup box)
VC - Refer to the following chart:
PLATFORM AND DUMP APPLICATIONS
IMPORTANT: To avoid costly delays in installation and improper operations, read and
understand this manual in its entirety before proceeding.
WARNING: Whenever work or maintenance is performed on a truck under a raised body,
always remember to prop the body up with the optional safety prop (40042) or
another safe method to avoid injury from the body inadvertently falling.
WARNING: To prevent damage to the truck's electrical system, disconnect the positive
battery cable and alternator when arc welding on the truck.
Cab to axle dimensions may differ
resulting in a change in capacities
shown.
Capacities include weight of body
which must be deducted to determine
payload.
Caution - Weight of cassis combined with
weight of body hoist and payload cannot
exceed GVWR or GAWR of truck.