Fabra Hood • Form C and D
3
Figure 6 Fabra hood Form C & D 471323
Figure 7 Fabra hood Form C & D 471323
Figure 8 Fabra hood Form C & D 471323
NYLOC NUT
Step 7
Install the END BIRDSCREEN ASSEMBLY, see Figure 6. Turn the BIRDSCREEN CLIPS (Which are preassemble to
the END BIRDSCREEN ASSEMBLY) so that two are under the SIDE BIRDSCREEN FRAME EXTENSION and the
other two are under the HOOD SUPPORT ANGLE and tighten down. See Figure 6, Detail D.
Step 8
Bolt together the HOOD RAIL ASSEMBLY LEFT to the
HOOD RAIL ASSEMBLY RIGHT, using two 5/16 X 1 inch
fasteners per HOOD RAIL ASSEMBLY, see Figure 7.
Step 9
Attach the HOOD RAIL ASSEMBLY to the HOOD SUPPORT ANGLES using 3/8 x 3/4 inch bolt with 3/8 inch
Nyloc nut at each attachment point, see Figure 8.
NOTE: Fasteners should be hand tightened only until Step 11.
Figure 6
Figure 7
Figure 8
