USAGE:
Contactless card lock can be used with three types of cards: “User Card, Service
Card and Master Card”. Also, the lock can be used with a password by selecting
the user card free operation. Service card is passive by default. You should
center the card when holding over the handle to enable accurate reading. Since
the device enters the sleep mode to offer low energy consumption, you need to
wake the lock up by pressing any button before each operation.
INITIAL SETUP:
• Assign Master card:
1- Press , two tone beep is heard.
2- And then present the master card to the handle until one tone beep is heard
and green led blinks.
•
Selecting Operation option of the mini K10p:
1- Press , present the master card to the handle and press , green
and red leds blink.
2- Press 1 for selecting operation options. And then
Press 0 for Individual operation with card.
Press 1 for One time use operation with card.
Press 2 for cardless Individual operation.
Press 3 for cardless One time use operation.
1
2
1
2
Page 4
This step is valid if there
is no assigned Master
Card before.
