Vemer GEO-2, Руководство пользователя

Страница: 12 / 64

En
gli
sh
- 10 -
User manual memo BT GPS
At the start the app displays the list of the associated memo BT GPS devices.
To associate a new device, press the symbol “+” in the upper right corner.
All the Bluetooth devices detected nearby are displayed: select the device to be associated from the list.
Note: each device is identified by the product code (for example VE789700) and by the serial number (for example 00000020).
These informations can be viewed from the main page of the memo BT GPS
Warning: make sure that the memo BT GPS is mains powered and that the display shows the main page (initial).
Otherwise the Bluetooth interface is not active and the device is not visible
Enter the password to associate the memo BT GPS with your device (if not modified the password is 123456)
After successfully completing the procedure, the memo BT GPS is added in the list of the associated devices.
Select the memo BT GPS on which you want to act from the list of the associated devices
Note: communication between the app and the memo BT GPS is point-to-point. This means that,
even in the presence of multiple memo BT GPS, the app can communicate with one only at a time.
The memo BT GPS currently connected to the app displays the symbol * immediately after the serial number
The app displays the initial page of the selected memo BT GPS. From this page you can:
a. Create new programs that will then be copied to the memo BT GPS
b. Change the settings of the memo BT GPS
c. View the parameters and associate an alias (name that identifies the time switch, such as “memo BT1 GPS Belluno”)
to the memo BT GPS
d. Manually control the relay output/s and activate the random switching function