Vemer S.p.A.
I - 32032 Feltre (BL) • Via Camp Lonc, 16
Tel +39 0439 80638 • Fax +39 0439 80619
e-mail: [email protected] - web site: www.vemer.it
USER MANUAL
ANALOG TIME SWITCH WITH TRIPPERS
Read carefully all instructions
The
DUET-D
and
DUET-W
time switches control any electrical installation by means of daily
(Duet-D) or weekly (Duet-W) programs. They are designed for household and similar operation
with normal pollution levels.
The cover on the front of the device makes it possible to replace the battery when it is run
down.
SAFETY WARNINGS
1) The device must be installed and activated by qualified personnel, following the
connection diagrams provided in this manual scrupulously
2) After installation, it must be made impossible to access the terminals without
specific tools
3) Before accessing the connection terminals, verify that the leads are not live
4) Do not connect or power the device if any part of it is damaged
5) The device must be installed and activated in compliance with current electric
systems standards
6) Do not use the device for purposes other than those indicated.
Code
Model
Description
VP879100
DUET-D
Daily analog time switch
VE125100
DUET-W
Weekly analog time switch
TECHNICAL CHARACTERISTICS
• Power supply: 230 V~ 50/60 Hz
• Switching capability: 16 (4) A 250 V~
• Power consumption: 0,5 W
• Operating accuracy: ± 1 second/day at 23°C
• Type of dial: 48 pins
• Minimum time of functioning:
- DUET-D: 30 minutes
- DUET-W: 3,5 hours (210 minutes)
• Switching accuracy:
- DUET-D: ± 5 minutes
- DUET-W: ± 35 minutes
• Manual control by 3 positions selector::
0
- Permanent disconnected
A
- Automatic operation
I
- Permanent connected
• Power reserve: 150 hours (NiMH rechargeable battery – replacing)
• Operating temperature: -10 °C ÷ +45 °C
• Protection class: II
• Protection category: IP20
• 2 DIN modules container
PROGRAM
• Lift the transparent cover
• Move all the setting pins towards the interior of the sphere (contact 3-2 remains closed)
• Move the setting pins corresponding to the desired switch on times outwards, in which contact
3-1 remains closed. Each pin corresponds to 30 minutes of functioning for Duet-D and 3,5 hours
for Duet-W
• The number of pins outwards determines the time of functioning
• Rotate the minute hand clockwise until the index and hands indicate the current time
• Close the transparent cover
• Power the device
• Manual mode: 3 positions are available with the selector.
BATTERY REPLACEMENT
• To replace the battery:
- disconnect the power supply
- remove the battery holder
- replace the battery
- connect the power supply
• Use V80H batteries only.
• Throw away the run down batteries in compliance
with current regulations on the disposal of armful waste.
REFERENCE STANDARDS
Compliance with Community Directives
2014/35/EU
(LVD)
2014/30/EU
(EMCD)
is declared in reference to the harmonized standard:
• EN 60730-2-7
DIMENSIONS
CONNECTION DIAGRAMS
BATTERY REPLACEMENT
ISCOM047-1805
Mod.
DUET-D
DUET-W
DESCRIPTION
16(4) A/230 V~
Battery cover
Index
Programming dial
Manual selector
Incandescent
3000 W
Fluorescent
1200 VA
Low voltage halogen
2000 VA
Halogen (230 V~)
3000 W
Low consumption lamp (CFL
1000 VA
Low consumption lamp (CFL
900 VA
Led
200 VA
