Vemer ADR-D 400 D90, Руководство пользователя

Страница: 16 / 18

- 28 -
User Manual - ADR-D 400 D90
English
CONFIGURATION ERROR
Every 30 seconds the software checks configuration settings in some internal registries;
if an invalid datum is detected, the device is automatically reconfigures until the error
disappears.
During these steps, the device does not measure any quantity and reads “CHIP Error”
Configuration error
If the error warning stays on even after disconnecting and reconnecting the device from
the mains, the latter must be considered as faulty.
REFERENCE STANDARDS
Compliance with Community directives:
2014/35/UE (LVD), 2014/30/UE (EMCD)
is declared in reference to the following harmonised standards:
• EN 61010-1 • EN 61000-6-2 and EN 61000-6-4 • EN 62053-21 and EN 62053-23
(metrological requirements)
information to users pursuant to art. 14 of the directive
2012/19 / EU of the european parliament and of the council
of 4 july 2012 on waste electrical and electronic equipment (WEEE)
If the crossed-out bin symbol appears on the equipment or packaging,
this means the product must not be included with other general waste
at the end of its working life.
The user must take the worn product to a sorted waste center,
or return it to the retailer when purchasing a new one.
Products for disposal can be consigned free of charge (without any new purchase obligation)
to retailers with a sales area of at least 400 m 2 , if they measure less than 25 cm.
An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its
subsequent recycling, helps avoid the potential negative effects on the environment and people’s health,
and encourages the re-use and/or recycling of the construction materials.